Visitor safety induction video: a guide

Filip FerianecNovember 19, 20267 min readVideo production
Visitor safety induction video: a guide

In many plants the visitor induction is still a sheet of paper at the gatehouse that people sign without reading. A short visitor safety induction video on a tablet does the job better: in two to four minutes it shows the zones, the protective equipment and the assembly point, and a quick quiz at the end confirms the person actually watched it. This guide covers what the video must include, how long it should be, how to handle languages and when a video is not enough.

Key takeaways

  • Slovak health and safety law (Act No. 124/2006, Section 6(7)) requires employers to look after the safety and health of everyone present on their premises with their knowledge. Visitors are not outside the safety system.
  • For contractors working on site, Section 18 adds that employers must inform each other about hazards, first aid, firefighting and evacuation, and agree their cooperation in writing.
  • A good visitor induction video runs 2 to 4 minutes. A 2014 study by Philip Guo and colleagues, based on 6.9 million video sessions on edX, found median watching time was at most 6 minutes regardless of video length.
  • Three questions after the video plus a record with name, date and video version are enough to prove it was watched. Set validity to, for example, 12 months.
  • Make two versions: a short one for visitors and a longer one for contractors who will work on the shop floor.

What should a visitor safety induction video include?

Exactly what a visitor needs in their first ten minutes on site, and nothing more. Squeeze your whole safety manual into it and nobody will even remember the assembly point.

The outline we put into our scripts:

  1. Welcome and escort rule (15 s). Who will accompany you and where you may not go without them.
  2. Zones and markings (30 s). Walkways, yellow lines, where forklifts drive. In practice this is risk number one.
  3. Protective equipment (30 s). Vest, glasses, shoes, hearing protection. Show where visitors get them and how to put them on.
  4. Prohibitions (20 s). Photography, phones near the line, smoking, restricted areas.
  5. Alarm and injury (40 s). What the siren sounds like, which way to leave, where the assembly point is, who to call. Real footage of the assembly point beats any floor plan.
  6. Check questions (20 s). Three multiple choice questions right on the tablet.

If you already have a safety training video for employees, much of the visitor version can be cut from its footage. That saves a shoot day.

Do visitors and contractors legally need a safety induction?

In Slovakia the law separates two situations. For visitors, the general duty in Section 6(7) applies: the employer must look after the safety and health of everyone on its premises with its knowledge. The law does not say how, which is exactly why it pays to have it documented.

Contractors are stricter. Under Section 18, when people from several employers work at a shared workplace, their cooperation must be agreed in writing, and the companies must inform each other especially about hazards, first aid, firefighting, rescue work and evacuation. A video delivers that information the same way to every technician, including at six on a Saturday morning when nobody from the safety team is at the gate.

Other organisations treat the video as the evidence trail. The University of Warwick, for example, requires contractors to keep records that every operative has viewed the contractor induction video, and adds a local induction on top. Still, a video does not satisfy the law on its own. Have your safety officer approve the content, the questions and the record, and write them into your internal rules.

This is an animated induction for visitors to NOV facilities, made by Signal, a studio in Aberdeen. The characters need no language and no specific building, so one film serves sites around the world. The trade off: visitors never see your actual gate, walkway or assembly point.

How long should the video be, and should you film or animate it?

Two to four minutes for visitors, five to eight minutes in chapters for contractors who will work on site. Anything longer gets skipped on a tablet.

Filmed footage of your own plant shows the real route from the gate to the hall and the real assembly point, which matters most in an evacuation. Animation is cheaper to update and language neutral. In practice the best mix is real footage of the site and the assembly point, with animated icons for prohibitions and equipment. For how to film in a running plant without stopping production, see our piece on filming in a working factory.

How do you prove a visitor actually watched it?

Three check questions after the video and an automatic record. A simple app or form on the tablet can store name, company, date, video version and the quiz result. For contractors, send the link ahead with a QR code in the invitation, so the gatehouse only has to check that the quiz was passed.

  • Questions need one clear answer. "Where is the assembly point?" with three photos works. "Why is safety important?" does not.
  • Validity: for example 12 months, or until the video changes. A new assembly point or route means a new version and a new confirmation.
  • Number your versions. After an inspection or an accident you can show exactly what the person saw.

How do you handle multiple languages?

Shoot so it is easy to translate: a person speaking on camera only at the start, the rest under voiceover with subtitles. A new language is then new text, a new recording and a new export, not a new shoot.

Slovak plants usually need Slovak and English, and for contractors often Hungarian, Polish, Ukrainian or German too. Our rough estimate: a visitor video with one shoot day costs 2,500 to 6,000 euros excluding VAT, and each extra language with a professional voice 300 to 800 euros.

When is a visitor induction video not enough, or not worth it?

When you get three visitors a month and the same person always escorts them. A single page and a good guide will do; a video would cost more than the problem it solves.

And it never replaces a local briefing before risky work. A contractor who is going to weld, work at height or enter an explosive atmosphere needs a permit to work and an on the spot briefing from someone who knows that place. The video is the gate to the site, not permission for everything behind it.

If you are sorting out inductions for your plant, see how we approach video production or tell us how many visitors and contractors pass through each month. We will tell you whether a video pays off, and if it does not, we will tell you that too.

Frequently asked questions about visitor safety induction videos

Can a video replace the visitor's paper signature?

It can, if the electronic record holds the name, date, video version and quiz result, and this method is written into your internal safety rules. Have your safety officer approve the exact setup.

How long should a visitor induction video be?

Two to four minutes. For contractors working on site, five to eight minutes split into chapters so each part can be updated on its own.

How often should the induction video be updated?

Whenever what it shows changes: the assembly point, routes, equipment or restricted zones. Review it with your safety officer once a year even if nothing seems to have changed.

Related posts

Get In Touch

Ready to get started?

Write to Us

NORDLYS

A creative studio and video production from Bratislava, for brands that want to be seen.

Follow Us:

Company Information

NORDLYS s. r. o.
Koreňová 733/18, 851 10 Bratislava - mestská časť Jarovce, Slovenská republika
IČO: 55449727
DIČ: 2122001728
IČ DPH: SK2122001728, podľa §7a

© 2026 NORDLYS s. r. o. All rights reserved.